Download as PDF

URL to view Results [Click Here]

Response Summary:


A hot work permit is required for any temporary operation involving flames or the producing of heat and/or sparks. This includes, but is not limited to: brazing, cutting, grinding, soldering, thawing pipe, torch applied roofing, and welding.

Instructions:
  1. Complete the checklist below indicating that all precautions have been considered and will be taken whenever possible. 
  2. Once complete, the permit request will be sent to EH&S and/or the Fire Marshal for review. 
  3. If the request is complete and precautions are satisfactory to the reviewer, you will receive an approved hot work permit via email within 24 hours. If this is a rush request, complete the request form then call EH&S Safety at 951-827-5118.
 
    After receiving the approved permit, it must be posted at the job site until hot work activity has been completed. When the job is finished, fill in the "Work Completion Notice" section at the bottom of the approved permit and email to hotwork@ucr.edu. Keep a copy of the permit for your records.
     
    Q2. PLEASE SELECT PERMIT TYPE:
    • Facilites maintenance and other small projects
     
    Q3. PRECAUTIONS CHECKLIST:
    Note: If necessary, please use the comments area below to further explain why a listed precaution cannot be taken in the manner described.
    • Available sprinklers, hose streams, and fire extinguishers are in service and operable
    • Hot work equipment is in good repair
    • Fire detection equipment protected from false activation
    • PPE is used to protect workers from physical and chemical hazards while hot work is being performed
     
    Q4.
    WITHIN 35 FEET (11 METERS) OF HOT WORK SITE:
    • Flammable liquids, dust, lint, and oily deposits are removed/cleaned
    • Explosive atmosphere in area is eliminated
    • Floors are swept and clean
    • Combustible floors are wet down and/or covered with fire protection blankets
    • Other combustibles are removed when possible or else covered with fire protection blankets or metal shields
    • All wall and floor openings are covered
    • Fire protection blankets are suspended beneath work
    • Ducts and conveyors that might carry sparks to distant combustible materials are protected or shut down
     
    Q5. FIRE WATCH/HOT WORK AREA MONITORING:
    • Fire watch will be provided during and for at least 30 minutes after work stops
        (including lunch and break times)
    • Fire watch is supplied with suitable fire extinguishers and fire fighting equipment
    • Fire watch is trained in the use of fire extinguishing equipment and in sounding emergency alarm
    • Additional fire watch may be required in adjoining areas, above, and/or below
    • Fire watch will verify isolated fire detection equipment is returned to normal operation
     
    Q6. WORK ON WALLS, CEILINGS, AND/OR ROOFS:
    • Construction is non-combustible and without combustible covering or insulation
    • Combustibles on both sides of walls, ceilings, and roofs are moved away
     
    Q7. WORK ON ENCLOSED EQUIPMENT:
    • , Enclosed equipment is cleaned of all combustibles
    • Containers have been purged of flammable liquids and vapors
    • Pressurized vessels, piping, and other equipment removed from service, isolated, and vented
     
    Q8. OTHER PRECAUTIONS TAKEN:

    N/A

     
    Q9. OTHER COMMENTS:

    N/A

     
    PLEASE COMPLETE ALL FIELDS BELOW
     
    Q11. HOT WORK BEING PERFORMED BY:
    • UC Riverside employee
     
    Q12.
    HOT WORK OPERATOR:
    Name

    Laszlo Nemeth
    Company/Department

    Sheet metal
    Mobile Phone Number (###-###-####)

    9516084081
     
    Q14. FIRE WATCH:
    Name

    Daniel Mandez
    Company/Department

    Sheets metal
    Mobile Phone Number (###-###-####)

    9518064082
     
    Q15. JOB TIME FRAME:
    Start date

    05/072025
    Start Time

    6.00 AM
    End Date

    05/08/2025
    End time

    1:07 PM
     
    Q16. LOCATION OF HOT WORK (BUILDING, FLOOR, ROOM, ETC.)

    Chapman Hall

     
    Q36. Project/WO Number:

    83733

     
    Q17. PROJECT/JOB DESCRIPTION:

    Cutting stainless steel duct work

     
    Q18. FACILITIES SUPERVISOR OR UCR PROJECT MANAGER SUPERVISING THIS JOB:
    Name

    Cory Gryniuk
    Phone Number

    (951) 743-6159
    Email

    cory.gryniuk@ucr.edu
     
    Q19. HOT WORK PERMIT REQUESTOR:
    Name

    Laszlo Nemeth
    Department/Contractor Company

    Sheet Metal shop
    Phone Number

    9518014081
    Email Address

    laszlo.nemeth@ucr.edu
     

    Embedded Data:

    N/A